Application
The M 9 SO2-ST is used as a protective or adhesive lacquer in the optical production. Due to the improved adhesive properties, this lacquer can be used to protect matt or polished surfaces against water, certain cutting oils or other mechanical affects for a much longer time. A detachment or contaminating of the surfaces is thereby prevented at the same time. The application can be done by brushing, spraying or dipping. Dilution of the lacquer may only be carried out with butyl acetate.
Technical data
Flowtime: 25 - 28 sec. / 20°C / 4 mm nozzle
Drying time: max. 3 hours
Resistance to water: after 8 hours no change of lacquer film
Resistance to petroleum: resistant
Curing time: at least 8 hours
Solubility: acetone, butyl acetate
Please note
The protection lacquer contains 55% of a flammable solvent.
Packing
- 1 kg tin can
- 5 kg canister